Emlite Dual Fuel Sender Only, For EML TU Meter

Display order

Description

1

Total Energy ( default display )

Active energy kWh total

2

Time

Time in 24hrs format

3

Date

Date DD/MM/YYYY

4

Pulses IP1 (Channel 0)

Pulse count received from the Sender on channel 0.

5

Scaling factor (Channel 0)

The pulse scaling factor for channel 0. This is the number of 1/1000ths of a unit each pulse from the Sender is worth, default value 10.

6

Scaled reading (Channel 0)

This is the sum of the scaled Sender pulses and the opening read. This display should match the value shown on the Gas meter.

7

Sender serial number
(Channel 0)

This is the Sender serial number contained within each pulse packet sent by the Sender. This display is used to ensure that the correct unit has bound with the Smart Meter.

8

LPR diagnostics

The upper line shows the total number of LPR messages received. The lower line shows the seconds since last receiving a message from the Sender and the Sender status byte, values defined later.

9

GSM diagnostics

Provides a description of the current status of the GSM. Once fully configured with an active listening socket the display shows:

• Upper line: signal strength and network operator
• Lower line: SIM IP address